Our Products
DM - BKFAE3L Online PET Blowing Machine
TECHNICAL SPECIFICATION:
| MACHINE SPECIFICATION | ||
| Machine Category | Fully Automatic | |
| Machine Model | DM-BKFAE3L | |
| No of Cavities | 3 Cavity | |
| Production Capacity (Bottles/Hour) | 3600BPH for 300ml | |
| (Depending on Moulds and pre-form Quality) | 3400BPH for 500ml | |
| 3200BPH for 1000ml | ||
| Blowing Capacity | 100ml – 1000ml | |
| Bottle Outlet | Through Air Conveyor | |
| Size of the Mould (Width x Thickness) | 120mm x 310mm | |
| CONTAINER SPECIFICATION | ||
| Types of Bottles Blowing | Water, Juice & Soda | |
| Types of Preform | Alaska & PCO | |
| Max. Neck Diameter | 28mm | |
| Max. Diameter of Bottle | 82mm | |
| Max. Height of the Bottle | 270mm | |
| ELECTRICAL SYSTEM | ||
| Pre-heating System | Near Infrared | |
| No of Heaters | 12 Nos | |
| Heater Capacity | 1500 Watts | |
| Machine Connected Power | 7KW, 3 Phase | |
| Machine with accessories Connected Power | 39KW, 3 Phase | |
| Total Power Consumption (Include accessories) | 27KWH (Units) | |
| AIR SYSTEM | ||
| Blowing Pressure | 20Bar | |
| Working Pressure | 6Bar | |
| Air Consumption | 68CFM | |
| REQUIRED ACCESSORIES | ||
| Compressor Capacity (High Pressure) | 30HP/25Bar/90CFM | |
| Air Dryer Capacity | 100CFM/25Bar | |
| Water Chiller Capacity | 3.5Ton@10 C | |
| Cooling Tower | 20 TR | |
MACHINE FEATURES:
Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.
- Advanced Infrared Preheating System for Upto 30% Power Saving.
- Blowing Toggle System for Easy and Lesser Mould Changing Time (Max.10min).
- Rapid High-Pressure Valves used for Blowing Functions.
- Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
- Air & Water Lines are Push & Pull System for Easy Maintenance.
- Air Recovery System is to recover & reuse the blowing air.
- Air Reservoir Tanks made of SS304 Material.
- After Blowing orientated ready bottle online air conveyor for feeding filling machine automatically.
- No Manpower needed for Preform Feeding.
- Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
- IP67 Grade Sensors used for Higher Accuracy & Long Life.
- Advanced PLC Based System with 7” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
- Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment.
- Machine Can Store 50 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
- High Productivity with Low Power Consumption.
- Easy operation & Easy maintenance.
- Production Display with Man Machine Interfacing Facility. The multi colour touch screen display is used to graphically view all the parameters.
- Compact Structure and low maintenance cost.
OUR VALUABLE PARTNERS:
Temperature ControllerAutonixKoreaLinear BearingsHiwinTaiwan
| Components | Brand Name | Country Origin |
| Electrical System | Schneider Electric | France |
| Pneumatic Systems | Festo | Germany |
| Motors & Gear Boxes | Transtech | Taiwan |
| Sensors | P & F Apex | Germany Japan |
| Bearings | NTN | Japan |
| Linear Bearings | HIWIN | Taiwan |
| Cables | Lapp Cables | Germany |
| Temprature Controller | Autonix | Korea |
| Linear Bearings | Hiwin | Taiwan |
